IHome IBN48 Operations Instructions download pdf (Page 5)

9V 2A

Quick Start

6

1: stand

Gently pull backwards on the indent of the stand located on

the rear of the unit and pull it into place for support mode. To

close the stand, simply press back into place.

2: power

Attach AC adaptor cable to DC jack on bottom of the unit

and plug the other end into a wall socket. A row of 4 blue

LED indicators will light up indicating the unit has power and

has begun charging the internal battery.

OPEN

RESET

TEST

Stand

9V 2A

3: pairing devices via NFC

If a compatible device, such as a phone, supports Near

Field Communication (NFC), activate its NFC feature,

and bring the NFC antenna of the device within close

contact of the NFC antenna on the top panel of the

iBN48 as shown above. The iBN48 powers on and the

LED will flash red/blue as the speaker connects to the

mobile device automatically. Once paired, the LED turns

solid blue and plays a confirmation tone.

4: pairing devices via Bluetooth

Press the Power Button on the iBN48. Press and hold

the pairing button for 2 seconds. While in pairing

mode, the LED indicator will flash red/blue. Activate

the Bluetooth option on your mobile phone. The iBN48

device will show as “iHome iBN48”. If prompted for a

passcode, enter ‘1234’ on your device. Once

connected, you will hear a confirmation tone and the

LED will turn solid blue.

1 2 3 4 5 6 7 8 9 10

No comments

IHome IBN48 Operations Instructions Page 5