IHome iDN45 Operations Instructions download pdf (Page 8)

Listening to other portable audio devices

Using the Unit in Other Countries

You can play an MP3 player or other portable audio device through the iDN45 via the Aux line-in Jack.

1. Plug one end of a 3.5mm stereo audio cable (available at http//:www.ihomeaudio.com) into the headphone or

line-out jack on your device and the other end of the patch cord into the iDN45 Aux line-in Jack, located on the back of

the unit.

2. Turn on the unit and press and release the Mode Button as needed until “Aux-in” appears in the lower part of the

display, indicating Aux-in playing mode.

3. Turn on and play your device.

4. Press the or Button on the unit to adjust the system volume. You may need to adjust your device volume, too.

Remember to turn off your device when you are done playing it.

Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that

matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA; if you

live in the US, you may skip this section.

1. Make sure the unit is OFF (not playing in any mode). Press and hold the Mode Button for about 5 seconds until “Radio

xxx” appears in the lower part of display. Press and release the + or – Button to set the “xxx” to your region.

2. Press and release the Mode Button again (or no button within 10 seconds) to exit the radio frequency setting mode.

Two beeps will confirm radio frequency setting.

Sleep Operation

Nap Operation

Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the

buzzer alarm.

1. Press the Nap Button located on the top of the unit as needed to adjust the nap timer for 5, 10, 15, 20, 30, 45, 60, 90

or 120 minutes or OFF.

2. When the nap timer is activated and the display changes back to show the real time, pressing the Nap Button once will

show the nap time remaining. Pressing it again will change nap time to the next highest setting.

Sleep mode lets you sleep to whatever is currently playing (iPad/iPhone/iPod or the radio), gradually lowering the volume

until the unit shuts off at the selected time.

1. Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate sleep mode. Sleep

mode has a Gentle Sleep feature which gradually lowers the volume. The unit will automatically turn off after the

selected sleep time.

2. You can adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF by pressing the Sleep Button again.

3. When the display changes back to show the real time, pressing the Sleep Button once will show the sleep time

remaining. Pressing it again will change sleep time to next lowest increment.

4. iDN45 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the

alarm volume. Press the or Button on the unit to adjust the system sleep volume. The sleep volume will remain

at that level the next time you enter sleep mode until controls are changed.

5. To stop listening at any time, press the Button on the unit to turn it off.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

IHome iDN45 Operations Instructions Page 8